Thank you for writing to us. One of our executive will reach back to you through your submitted medium. In case there’s an urgency, feel free to connect over WhatsApp for faster response.
Prefer calling? Dial +9108048400471 (International callers) or 08048400471 (Indian callers).
Features
Compact and aesthetically built
Conforms to all leading standards
Simple design, fewer parts, easy access to coupling bolts, output terminals
Simple to install and maintain
Popular range of flange adaptors & flexi disc coupling
Wound with 2nd/3rd pitch in stator to eliminate harmonics
Sophisticated & reliable AVR
Phase Three/single
Frequency, Hz 50
Voltage, V 415/240
Power factor, lag 0.8
Ambient 40°C
Altitude 1000 mtrs
Speed, rpm 1500
Mounting Horizontal foot mounted
Duty Continuous
Direction of rotation Clockwise from DE
Automatic voltage regulator M/c mounted
Voltage regulation +/-1% with 4% prime mover speed variation
Standards IS 4722 -1992, IEC 34
Class of insulation H
Temperature rise H
Enclosure IP 20
Cooling IC 01
Wave form distortion (thd) Less than 3%
Overload capacity 10% overload for 1 hour. once in 12 hours.
Unbalance permitted 25% with none of the phase currents exceeding the rated current. Temperature rise limits for corresponding class of insulation may exceed 10°C under such conditions. Voltage regulation under above conditions will not apply
No. of bearings Single/double
Lubrication type Grease lubricated
Withstand wide voltage fluctuations from 180 to 240V and from 120V to 220 V for DC 5M
Suction lift up to 7.5 m
Models are with IP-44 Protection
'B' Class insulation
All hydraulic parts are CED coated for rust free longer life
Hygienic for drinking water
APPLICATIONS
Domestic Water Supply
Water Supply for fountains, sumps and water tanks
Gardening and Small Irrigation
Specifications
Capacity 6660 to 900 lph
Head 8 m to 25 m
Power rating 0.37 kW to 0.55 kW (0.5 HP and 0.75 HP)
Voltage range : 180-240V
PENDING
Kirloskar Domestic monoblock monoset pumps in pune
8 hp Water-Cooled Pumpset
Engine type:
Vertical, Single Cylinder, Water-Cooled,
Four-Stroke Cycle, Compression Ignition
Diesel Engine.
Cooling Water-Cooled
Model AV1XL-N5
No. of Cylinders 1
Cubic Capacity (ltr) 0.481
Rated Speed (rpm) 2200
Governing Class"B1"
Features
Power rating: 8 hp.
Starting: Hand start.
Type of fuel injection: Direct Injection.
Overall Dimensions of the standard: 450 X 445 X 635 (Length X Width X Height)
Head range: 25.6 - 35.2 metres
Discharge range: 11.9 - 8.1litres per second
Technical Specification
No. of Cylinders - 1
Bore X Stroke (mm) 102 X 116
Cubic Capacity (Ltr) 0.948
Compression Ratio - 17.5 : 1
Rated Output kW(hp) 7.4 (10)
Rated Speed rpm 1500
Torque at Full Load (Crankshaft Drive) kN-m(kg-m) 0.048 (4.775)
Crank Shaft Center Height (mm) 203
Specific Fuel Consumption (SFC) (gm/hp-hr) 195 + 5%
Lub Oil Consumption - 0.8% of SFC max.
Lub Oil Sump Capacity (Ltr) 3.7 at higher level on dipstick
Fuel Tank Capacity (Ltr) 11.5
Physical dimensions of bare engine (Length X Width X Height) (mm) 531 X 546 X 878
Engine Weight (dry) (kg) 194
Rotation while looking at the flywheel - Clockwise
Power Take-off - Flywheel End
Starting - Hand Start
Governing - Class “A2/B1”
Type of Fuel Injection - Direct Injection
Overloading Capacity of Engine - 10% of Rated Output